FONÇEV Mühendislik Atık Su Arıtma Havuz Kimyasalları

pH Adjusters

PT-10
DESCRIPTION: Provides reducing of the pH value and contains inorganic acids in liquid form.
USAGE: 75-100 grams for every 10 m3 in soft water., every 10 m3 in hard water 170-200 grams
PACK: 30 kg.

PT-11
DESCRIPTION: Provides reducing of the pH value and contains organic acids in powder form.
USAGE: 50 grams for every 10 m3 in soft water., every 10 m3 in hard water 100 grams
PACK: 25 kg.

PT-12
DESCRIPTION: Provides to raise pH level of the pool water. It is alkaline based substance in liquid form.
USAGE: solutions are prepared in 10% and   dosing according to the hardness of water. 50 gr PT-12 for 10m3 soft water. 150 gr PT-12 for 10m³ hard water.
PACK: 25 kg 

PT-20 T
DESCRIPTION: Slow dissolving tablets, include approximately 90% active  chlorine ingredient in case. It is Used for continuous chlorination.
USAGE:  1 Tablet PT-20T for 30 m³ water. 20-40 gr granule. PT-20T for 10 m3  water (With chlorine and Dispensers).  
PACK: 50 kg.

PT-21
DESCRIPTION: Quick dissolving granules, include approximately 56-57% active chlorine ingredient in case. It is used for continuous and instantaneous chlorination.
USAGE: 30-60 gr PT-21 for 10 m3 water in continuous chlorination. 120-180 gr PT-21 for 10 m3 water in instantaneous chlorination.
PACK: 50 kg.

PT-20
DESCRIPTION: Quick dissolving granules, include active chlorine ingredient in case. It is used for swimming pool.
USAGE: It is disinfects swimming pools providing active chlorine. Approximately  0,5 gr/m3 active chlorine is ideal value. (Indoor Pools 0,2-0,5 gr/m3, outdoor pools  0,3*0,6 gr/m3)
PACK: 50 kg.

PT-24
DESCRIPTION: It is almost neutral state, not including chlorine and in liquid form. It kills algae
USAGE: It is used for first usage of pools. Surfaces of the pool are scrubbed with %25 PT-24. After that, it is dosed with 25-50gr PT-24 for 10m³ water at one time in a week.  200gr PT-24 is used for instantaneous dosing for 10m³ water.
PACK: 25 kg.

PT-31
DESCRIPTION: It accelerates the precipitation of solids, causes blurry in water. It is in liquid form.
USAGE: It is prepared as %10 solution and dosed 20-100gr for 10m3 water. Bottom sediments of pool are swept by bottom sweeper.
PACK: 25 kg.

PT-32
DESCRIPTION: It purifies the precipitation of solids, organic and inorganic oil, silicates, causes blurry in water. It is in liquid form.
USAGE: PT 32 As it can be used alone also used with PT 30 or PT 31. It is prepared as %10 solution and dosed 100-200ml for 10m3 water.
PACK: 25 kg.

PT-40
DESCRIPTION: It purifies the precipitation of solids, organic and inorganic oil, lime, occurred on filter and surface. It contains special inhibitors and is in liquid form.  It is not harmful because not including acids.
USAGE: It is applied to filters directly but for surface, applied with hot water using %10-20 solutions. It waits 15-20 minutes after applied to surface via brushes and then it is rinse out.
PACK: 25 kg.

PT-41
DESCRIPTION: It clarifies opacity and lime because of the water hardness. It is in liquid form.
USAGE: It is applied directly to the pool. It is dosed 100-300gr for 10m3 water.
PACK: 25 kg.